Concrete Edge Products
Versatile Concrete Edge Rigid Perimeter Insulation Technology
Over 15 Years of Experience | Used in Commercial and Residential Sites | Free Consultation
Over 15 Years of ExperienceUsed in Commercial and Residential SitesFree Consultation
EnergyEdge Products Form, Insulate & Protected - One Product, One Step
Edge forming systems from Energy Edge perform multiple functions that will help speed up your construction processes.
Our forming systems are extruded in an "E" shaped with high-density R-10 EPS insulation and serve three functions.
- They form the concrete slab and foundation edges
- They remain in place to transition and protect concrete edges
- They insulate the slab
You end up with a concrete edge that is thermally isolated at its transition from below grade to wall, with glazing and finishing systems resting on top.
Consultations Will Help You Customize Your Order
We have many variations and hybridizations of our systems, and we can help you select the customizations that will work best for your project. Call us
today and let's begin the process of finding versatile, cost-efficient approaches to your work.
Energy Edge Product SKUs and Material Data
Description: Full Height Edge Insulation, "FB", Forming Rail - EE8fb
Insulation: Contains R-10 2lb Density EPS w/ insect-resistant borate
Dimensions: 8" tall x 2.75" wide x 10' long
Weight: 14lbs / rail
Packaging: Standard order pallets of 75 rails (750 lf)
Other parts, reference: EE8sb support braces and FB90 corners
Applications: Ideal for 2 x 6 wood framing and commercial projects where full edge insulation is desirable, basement and stem-wall formed wall inserts.
Description: 1-1/2" x 1-1/2" Notched, "MB", Forming Rail - EE8mb
Insulation: Contains R-10 2lb density EPS w/ insect resistant borate
Dimensions: 8" tall x 2.75" wide x 10' long
Weight: 14lbs / rail
Packaging: Standard order pallets of 75 rails (750 lf)
Other parts, reference: EE8sb support braces and FB90 corners
Applications: Ideal for 2 x 4 wood framing and commercial projects requiring full wall bearing, basement, and stem-wall formed wall inserts, weep offsets for stucco, EIFS, adhered stone and more.
Description: Support Brace "SB" for "FB" and "MB" Forming Rails - EE8sb
Interior Support: SBbraces "snap" into top and bottom on the interior of EErails and are mechanically fastened to concrete foundation.
Packaging: Come in boxes of 80
Weight: 22 lbs / box. Other parts, reference: For "FB" and "MB" rails.
Applications: Install one brace across each "butt" joint of EErail, 12" on either side of joints and 24" oc elsewhere. Figure 5 to 6 braces per rail when estimating. Also acts as perimeter re-bar support "chair". Use PAF or common "drilled" concrete fasteners.
Description: 90d Corner Transition for EE8fb (FB90) and EE8mb (MB90)
Dimensions: 4" x 2-3/4" angle member
Weight: 4 lbs. per box of 10
Packaging: Box of 10, includes color matching, self-tapping, screws.
Other parts, reference: EE8fb and EE8mb forming + insulating rails
Applications: Used for connecting and finishing both inside and outside corners for EErails. Can also serve as termination cover for exposed ends of EErails if necessary. This EE angle material can be ordered in 10' lengths (EEextension) and cut to cover stacked EErails.
Description: Leveler and Utility Angle
Dimensions: 4" x 2-3/4"
Weight: 1 lb per bundle of 10
Packaging: Bundles of 10, includes color matching, self-tapping, screws
Applications: Leveler angles are mechanically fastened to rough and out-of-level concrete substrates in alignment with face of EErails and then fastened to properly leveled EErails with provided self-tapping screws. Use 1 per 30", interior shimming below EEbraces and/or exterior kickers is necessary.
EnergyFlash Product SKUs and Material Data
Description: 17" Protective Flashing for 2" Insulation Board - EF217
Dimensions: 17" tall x 2" deep w/ 14" of face protection
Weight: 10 lbs.
Packaging: Contact manufacturer for shipping standards and quantities
Other parts, reference: EF90 Support braces
Applications: Ideal for protecting post-applied 2" rigid insulation on new construction projects where vertical attachment to sheathing or structural wall material above top of rigid insulation is possible. 3" interior attachment flange has 2 rows of expansion slots allowing for material expansion. Horizontal has relief slots to provide a positive slope to outside.
Description: 14" Protective Flashing for 2" Insulation Board - EF214
Dimensions: 14" tall x 2" deep w/ 14" of face protection
Weight: 10 lbs.
Packaging: Contact manufacturer for shipping standards and quantities
Other parts, reference: EF90 support braces
Applications: Ideal for protecting post-applied 2" rigid insulation on retro-fit or high-performance wall systems like ICF block. Face attached material requires horizontal vertical expansion joints at 5' oc, typically. Horizontal has relief slots to provide positive slope to outside.
Description: 90d Corner Transition for EF214 and EF217 EnergyFlash - EF90
Dimensions: 4" x 2-3/4" angle member
Weight: 7 lbs. per box of 10
Packaging: Box of 10, includes color matching, self-tapping, screws.
Other parts, reference: EF214 and EF217 EnergyFlash flashings
Applications: Used for connecting and finishing both inside and outside corners for EnergyFlash protective flashings. Can also serve as termination cover for exposed ends if necessary. This EE angle material can be ordered in 10' lengths (EEextension) and cut to cover stacked or offset EnergyFlash protective flashings.
Share On: